Concrete and paver sealing Melbourne
Unsealed concrete and pavers soak up oil, tannins and moss and slowly break down under Melbourne weather. A sealer applied to a clean, dry surface stops that and keeps the colour looking fresh for years.
Driveways and exposed aggregate
Pressure washed, degreased, allowed to dry, then sealed with a solvent or water-based acrylic in a natural or wet-look finish. Slip additive available for sloped driveways and ramps.
Pavers, pool surrounds and courtyards
Sandstone, bluestone, travertine and concrete pavers. We pick a penetrating (invisible) or topical (enhancing) sealer depending on the stone and how you want it to look.
Commercial and warehouse floors
Densifiers and penetrating sealers that harden the slab, cut dusting and make forklift traffic areas easier to clean, without the build of a full epoxy system.
At a glance
| Surfaces | Concrete, exposed aggregate, natural stone, pavers |
|---|---|
| Sealers | Penetrating, acrylic wet-look, densifier |
| Prep | Pressure wash and degrease included |
| Recoat | Typically every 3 to 5 years, traffic dependent |
Common questions
Wet look or natural finish?
Wet look deepens the colour and adds gloss, good for exposed aggregate and coloured concrete. Natural or penetrating sealers protect without changing the appearance, which suits natural stone and pavers. We can show you both on a sample area.
Do you clean before sealing?
Always. Sealing over dirt or moss locks it in. Every sealing job includes a pressure wash and, where needed, a degrease or moss treatment.
Related services
Ready for a floor you are not embarrassed by?
Free on-site quotes across Melbourne. Most quotes back within 24 hours.